At long last, this is the finished product. They will be leaving here as fast as I can assemble them. Thanks again to everyone for their patience. I think you'll find them to be worth the wait.
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Lining clamps begin shipping!!! [PICS] http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=9706 |
Page 1 of 2 |
| Author: | John Watkins [ Thu Dec 07, 2006 8:10 am ] |
| Post subject: | |
At long last, this is the finished product. They will be leaving here as fast as I can assemble them. Thanks again to everyone for their patience. I think you'll find them to be worth the wait.
|
|
| Author: | peterm [ Thu Dec 07, 2006 8:19 am ] |
| Post subject: | |
WOW!! Sure look great!! |
|
| Author: | alambert [ Thu Dec 07, 2006 8:41 am ] |
| Post subject: | |
those are pretty neat. |
|
| Author: | Alain Desforges [ Thu Dec 07, 2006 8:51 am ] |
| Post subject: | |
Wow John! Can I still buy some of those? I never saw anything to that effect before... Was this a group buy thing? I hope I didn't miss out! 
|
|
| Author: | Sylvan [ Thu Dec 07, 2006 8:52 am ] |
| Post subject: | |
John - Thanks so much for doing a great job. They look terrific and I am sure they will work equally as well! |
|
| Author: | John Watkins [ Thu Dec 07, 2006 9:35 am ] |
| Post subject: | |
Thanks, Guys. Alain, they will be available for purchase in great quantity for the rest of my life thanks to extrusion minimums. 
You can order them in either size or configuration at cncguitarparts.com |
|
| Author: | Andy Zimmerman [ Thu Dec 07, 2006 2:06 pm ] |
| Post subject: | |
Looks great John I cannot wait to receive mine!!!!! |
|
| Author: | Steve Kinnaird [ Thu Dec 07, 2006 2:11 pm ] |
| Post subject: | |
Oh MAN! Glad to hear this good news! Steve |
|
| Author: | Alain Desforges [ Thu Dec 07, 2006 7:18 pm ] |
| Post subject: | |
Right on! Man, I swear every time I look at those, they get sexier and sexier... I need HELP!
Thanks for the info John, now my TAS sense is tingling! |
|
| Author: | Kim [ Thu Dec 07, 2006 8:08 pm ] |
| Post subject: | |
Git ya eyes off Alain, them ones are mine buddy
Great news, they look really good. Just like John's fret caul and inserts, these clamps are of a quality that will easily see out the original buyer and then quite a few generations of new builders yet to come. No doubt in what is fast shaping up as the age of cheap nasty junk, all who inherit them down the line will be grateful to the initial buyer for showing such good judgement in their support of the manufacture of such fine tools. Cheers and thanks John Kim |
|
| Author: | John Watkins [ Thu Dec 07, 2006 10:51 pm ] |
| Post subject: | |
Thanks for the nice comments guys, especially Kim; always so generous, so eloquent, and ever so correct. 
|
|
| Author: | Serge Poirier [ Fri Dec 08, 2006 12:55 am ] |
| Post subject: | |
I'll certify that everything that comes ou of John' super shop IS top notch, way to go sir, ya done it again! 
|
|
| Author: | Pwoolson [ Fri Dec 08, 2006 12:59 am ] |
| Post subject: | |
[QUOTE=Serge Poirier] I'll certify that everything that comes ou of John' super shop IS top notch, way to go sir, ya done it again! [/QUOTE]
Well Serge, I've come out of John's shop a few times...not sure about the top notch thing in that case. 
But as to the PRODUCTS coming out of his shop, yes, you are correct sir. Living so close to John, I get to see some of the things he makes en-production. It's a real treat that I get and you schleps don't! HA, ha, ha! (ooo, that wasn't nice was it?) |
|
| Author: | crazymanmichael [ Fri Dec 08, 2006 1:13 am ] |
| Post subject: | |
hey, what happened to pretty blue??????? am looking forward to their arrival!!! |
|
| Author: | Serge Poirier [ Fri Dec 08, 2006 1:15 am ] |
| Post subject: | |
Paul, you tease you! I'll bet you get TAS more often than us and that you have to hide yo credit card before visiting him huh? HA HA HA HA HA!
|
|
| Author: | RichB [ Fri Dec 08, 2006 1:18 am ] |
| Post subject: | |
Those look geat John...Just in time for Christmas!
|
|
| Author: | Lillian F-W [ Fri Dec 08, 2006 3:00 pm ] |
| Post subject: | |
[QUOTE=Pwoolson] snip PRODUCTS coming out of his shop, yes, you are correct sir. Living so close to John, I get to see some of the things he makes en-production. It's a real treat that I get and you schleps don't! HA, ha, ha! (ooo, that wasn't nice was it?)[/QUOTE] No Paul, that wasn't nice at all. Not at all. Lump of coal in your stocking. |
|
| Author: | John Mayes [ Fri Dec 08, 2006 3:32 pm ] |
| Post subject: | |
looking awesome John! |
|
| Author: | Pwoolson [ Sat Dec 09, 2006 1:20 am ] |
| Post subject: | |
[QUOTE=Aoibeann] [QUOTE=Pwoolson] snip PRODUCTS coming out of his shop, yes, you are correct sir. Living so close to John, I get to see some of the things he makes en-production. It's a real treat that I get and you schleps don't! HA, ha, ha! (ooo, that wasn't nice was it?)[/QUOTE] No Paul, that wasn't nice at all. Not at all. Lump of coal in your stocking.[/QUOTE] Yikes, Lillian, I'm hoping you don't have an "in" with the big guy in the red suit. On the other hand...A lump of coal would heat the shop for an afternoon.
|
|
| Author: | Lillian F-W [ Sat Dec 09, 2006 4:22 am ] |
| Post subject: | |
Well Paul, I'll have him make it three. That way you can work through the evening. As for the clamps, I know what I'm getting for my birthday. OOOoohhhh, one for each year. That ought to do a side. |
|
| Author: | Keith M [ Sat Dec 09, 2006 5:50 am ] |
| Post subject: | |
One each year I could do a Jumbo and a Uke. |
|
| Author: | Lillian F-W [ Sat Dec 09, 2006 5:54 am ] |
| Post subject: | |
Well, you know a girl should lie about her age.
|
|
| Author: | Pwoolson [ Sat Dec 09, 2006 5:58 am ] |
| Post subject: | |
Lillian, 29 will only get you about half way around a rim. |
|
| Author: | Lillian F-W [ Sat Dec 09, 2006 6:15 am ] |
| Post subject: | |
Okay, so I'll be able to do a side and a half.
|
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|